Exquisitely, Hand Painted, Electric Guitars.
©
IN THE WORKS
The "Roundabout" guitar, shown below, is nearly complete!
This circular-inspired design draws from the bold, vibrant works of Robert and Sonia Delaunay—and from my amazing mom, Dyan Rosenberg. I’m aiming for a mid-June release (give or take), so keep an eye on my Instagram @julierosenbergguitar and my website for the latest updates.
Some of the featured gear will include: DiMarzio pickups – Titan Neck (neck), Dark Matter 2 (middle), and Satchur8 (bridge). Kluson tuners in a stunning gold finish. TonePros tune-o-matic bridge and tailpiece. Want it? Get in touch HERE!
NEXT! Semi-hollow, double-cutaway archtop electric guitar. In the prep/painting stage of production. ETA early 2025.
Precision Guitar Description:
Body Details:
-
African Mahogany 2pc center section
-
Solid Maple dual-carved caps
-
Body is 16-1/2″ wide and 3″ thick overall
-
Routed for 2 humbuckers
-
Routed for 4 pots, switch and jack
-
Bridge and stop piece are drilled for 7/16″ / 11mm studs
-
Bridge stud to stud spacing: 2.91” / 74mm
-
Tailpiece stud to stud spacing: 3.23” / 82mm
-
Neck pocket precisely cut for precision joint
Neck Details:
-
African Mahogany 1pc quartersawn neck
-
Indian Rosewood fretboard with 22 frets, 24.75” scale
-
Pearloid trapezoid inlays
-
Jescar medium jumbo fret wire – .100” wide x .045” high
-
Neck back profile is ‘59 Medium – 1st Fret .877” / 12th fret .976”
-
Maple headstock overlay
-
10mm tuner holes
-
Neck angle is 5.75 degrees
-
Long tennon design cut for pickup
-
11 degree headstock angle
-
1-11/16” nut width
-
12″ fretboard radius
